Product Training Aids

This introduction describes the basic information regarding Steam Mass and Liquid Delat Heat applications.

This document includes a series of step by step verification tests normally done during commissioning.

TrainingAid on Using SUPERtrol II Datalogger
The SUPERtrol II Flow Computer has an internal data logger that can be used to periodically log the time, date, totalizers, and average values of various process variables.

Training Aid on Using SUPERtrol II withAccelabar Flowmeter
The Accelabar is a proprietary Veris flow meter which finds its application in steam metering. The Accelabar flow meter design offers the ability to provided accurate metering even when installed with short inlet and outlet straight pipe runs. It also offers a wider flow turndown than orifice plates and flow nozzles.

Training Aid on Using SUPERtrol II with Gilflo Flowmeter
The Gilflo B Series is a proprietary Spirax Sarco flow meter which finds its primary application in steam metering. The Gilflo B Series design offers a very wide flow turndown unmatched by orifice plates and flow nozzles.

Training Aid on Using SUPERtrol II with ILVA Flowmeter
The ILVA is a proprietary Spirax Sarco flow meter which finds its primary application in steam metering. The ILVA design offers a very wide flow turndown unmatched by orifice plates and flow nozzles.

Training Aid on Using SUPERtrol II with V_CONE Flowmeter
The V-CONE is a proprietary McCrometer flow meter which finds its primary application in steam metering. The V-CONE flow meter design offers the ability to provided accurate metering even when installed with short inlet and outlet straight pipe runs. It also offers a wider flow turndown than orifice plates and flow nozzles.

Training Aid on Commissioning the MPP2400N and IM2400 Telephone Modems with SUPERtrol II

Training Aid on Using and Testing RS485 Modbus RTU
RS485 allows up to 32 devices to share a single communication cable. Modbus RTU is an industry standard protocol used by a variety of systems.

A presentation showing applications representing solutions for energy management with descriptions of the type of metering being depicted.

A presentation showing products used in applications representing solutions for energy management.

An overview of flowmetering technologies for use with KEP Flow Computers

Level/Total and Level/Batcher  

Economical Rate/Totalizer & Batcher  

Multifunction Flow Computer  

Multifunction Heat, Gas, Steam Liquid Flow Computer  

520K & MINITROL Presentation  

Tech Tip for Real Time Internet Access for ST2 using Modbus TCP
Download The Tech Tip for Information
Download the project files for real time demonstration accessing a SUPERtrol-2 connected to internet at KEP headquarters.
You can download all the files needed by selecting the "Download Project Files (ZIP)" button at left or you can download each file separately below:

This a KEP Tech Tip explains step by step instructions for wiring and configuring the Supertrol 1 flow computer with various slip and ticket printers.

A detailed application note from KEP's application engineering staff describes a typical heated/chilled water metering system using a magnetic flowmeter and the SUPERtrol-II Flow Computer.

Real-Time Wireless LAN
Access for SuperTrol-2 Using Modbus TCP

A detailed application note from KEP's application engineering staff describes how the SuperTrol-2 can be configured to provide an IP Address connection via a Modbus TCP data exchange over the wireless LAN, or to a remote PC using the DIGI Wi-SP converter.

KEP was recently involved in a submetering application at a major entertainment complex in New York City. The Client is purchasing 125 psig saturated steam from a regional supplier and is submetering the steam to 10 individual buildings and/or resource centers, including a school for the performing arts.  

This Tech-Tip shows the wiring for connecting a Yokogawa Vortex Meter (DY Series) to a SUPERtrol II (ST2) Flow Computer. The diagram also shows the wiring for a 2-wire pressure transmitter.