|
|
|
using a BATR/T2A and a Tubine Meter with Magnetic Pickup at a Remote Location.
The BATR/T2A works well in this remote application because it is Battery powered and will monitor Rate of Flow and Total Flow without any external power source. The BATR/T2A recieves the signal from the Magnetic Pickup Flow Meter and accepts its input signal on Terminals 1&2 (Mag Inputs 1&2). In this application the BATR/T2A is programmed so as to read the Magnetic Pickup and display Rate and Total Flow. The Total Flow or Rate of Flow can be viewed from the two lines of display. This hardware configuration can be used for Monitoring Liquid Flow Applications.
|
Note:
All documents and software are subject to change without notice and
are to be considered "uncontrolled documents". Consult with factory
for most current release. |
||
 |
10 Industrial Way
East, Eatontown • NJ 07724 USA Phone: 732-935-1320 • Toll Free: 800-631-2165 • Fax: 732-935-9344 • Order
Desk Fax: 732 935-0421 |
Copyright© 2005 |
