|
|
|
in a Parallel Pipe Situation using a MINItrol
The MINItrol MRT powers both turbine flow meters and accepts their pulse input signals on channels A and B. In this application the MINItrol is programmed so as to add together the pulses from channels A and B (A+B mode). In this way a total consumption of additive is calculated. The total consumption is obtained whether one pump is running and one standing by or whether both are running. This hardware configuration could be used for separately totalizing two different additives. The MINItrol would be programmed for its A sep B mode.
|
Note:
All documents and software are subject to change without notice and
are to be considered "uncontrolled documents". Consult with factory
for most current release. |
||
 |
10 Industrial Way
East, Eatontown • NJ 07724 USA Phone: 732-935-1320 • Toll Free: 800-631-2165 • Fax: 732-935-9344 • Order
Desk Fax: 732 935-0421 |
Copyright© 2005 |
