KEP Flow Products

Flow Computers

Flow Computers
What is a flow computer?
A special purpose device which computes a corrected flow based on information derived from raw input signals and stored sensor and fluid properties information
What are the typical applications requiring a flow computer?
Computation of Heat Flow, Mass Flow, Corrected Volume Flow typically require a flow computer. In addition, many flow sensors require linearization to improve accuracy. The flow computer is also used for data logging, communication, remote metering, alarming and control functions. In many cases a flow computer may replace some of the functionality of a small PLC in your application.
See Flow Computers

Batch Controllers

Flow Computers
What is a Flow Batch Controller?
A special purpose instrument which is intended to be used in conjunction with a flow sensor and a control valve to dispense a desired amount of a fluid into a container, tank, or vehicle. In some cases the temperature may also be used to estimate the fluid density from stored fluid properties.
How does a Batcher Work?
The operator begins by entering the desired amount of fluid to be dispensed into a batch quantity setpoint on the instrument. The Start button is pushed. The valve opens and the vessel begins filling. The flow sensor sends the flow signal to the batcher. The batcher compares the total amount delivered and shuts the valve when the desired amount has been dispensed.
See Batch Controllers


Process, Level, Temp.

Process Monitors, Level Indicators, Temperature Displays
What is a Process Monitor?
This is a general purpose instrument that is intended to condition the electrical signal generated by a process sensor and scale the resulting information into a display in the units of measure desired by the end user. Additional, functionality such as alarms, analog output, and serial communications may also be provided.
See Process, Level & Temperature Monitors

Field Indicators

Field Indicators
What is a Field Indicator?
Field indicators are signal conditioner/converter devices with a display. Field Indicators are intended for mounting on or near the flow sensor. They perform many of the same roles of signal conditioner/converters plus that of providing a convenient local display. Many “smart” Field Indicators provide additional, advanced functionality such as sensor linearization.
See Field Indicators


Ratemeter / Totalizers

Ratemeters and Totalizers
What is a Rate/Totalizer Indicator?
This is a general purpose instrument which conditions the electrical signal generated by the flowmeter and scales the resulting flow information into a flow rate and flow total display in the units of measure desired by the end user. Additional functionality such as alarms, analog output, pulse output, and serial communications may also be provided. Also see the section on flow computers.
See Ratemeter / Totalizers

Special Flow Instruments

Special Flow Instruments
Engineering Specials (ES) and Manufacturing Specials (MS)
ES and MS Products are standard units that have been modified to meet special needs or for targeted applications. We offer a variety of special products for Liquid & Gas Applications, Vehicle & Skid Mount, for use with Thermal Mass Flowmeters, Rugged, Field Mount, Dual Ratemeter/Totalizer, Replacement Batchers and Net Flow Monotor of Boiler Fuel.
See Special Flow Instruments


Signal Conditioners

Signal Conditioners
What is a Signal Conditioner?
Signal conditioners and converters are ancillary devices intended to amplify, filter, condition, scale, and convert the low level “raw” signals produced by many transducers and convert it into the desired, industry standard high level signal before transmitting it across a potentially noisy environment. In some cases, a secondary function is providing signal isolation.
See Signal Conditioners

Enclosures

Enclosures
What is a Signal Conditioner?
Signal conditioners and converters are ancillary devices intended to amplify, filter, condition, scale, and convert the low level “raw” signals produced by many transducers and convert it into the desired, industry standard high level signal before transmitting it across a potentially noisy environment. In some cases, a secondary function is providing signal isolation.
See Enclosures


Communication Solutions

Enclosures
RS422/485-RS232 Converters, Modems, Ethernet Port Servers, OPC Server & Remote Metering Software
KEP seeks to assist our customers in “getting connected” by using the serial communication ports provided on many of our models such that they may be used for communications with computers, for modems, for printing, for datalogging, and in wire-line and wireless communications. KEP offers a variety of compatible hardware and software system building blocks which many users find helpful in interconnecting their instruments to their computer over their preferred communication channel.
See Communication Solutions

Automation Software for Flow Computers

Factory Automation Software for Flow Computers
HMI (Human Machine Interface) , OPC Server & Remote Metering Software
The selection of factory automation hardware and software is a topic still quite new to many users of conventional flow instrumentation. They are presented with a increased range of possible solutions to their plant wide automation needs. Broadly speaking there are three basic approaches to solve instrumentation and control needs. These are networks of instrumentation, or PLC based designs, or PC based designs. Each has its own merits based on the size of the plant and the need for local control. Industrial PC’s are finding their way into more and more monitoring and control applications each year. In most cases the PC is used as an operator station or data gathering station which collects information from a number of instruments or PLC’s. Many users are trying to grow their own system by looking at their need for information and tackling small portions of their plant one step at a time and slowly adding these to their existing PC network within their plant.
See Automation Software


Flow Product Accessories

Flow Product Accessories
Many Accessory Products Available
  • Enclosures
  • Power Supplies
  • Amplifiers
  • Printers
  • Mounting Kits

See Accessories

Discontinued Products

Discontinued Products
List of Obsolete Products and Suggested Replacement
  • Find suggested replacement for discontinued products
    (if applicaple)
  • Datasheets Available (for information purposes only)

See Discontinued Products

Richard Gruskos

Eastern U.S. Flow Sales Manager
Richard Gruskos - Eatern U.S. Flow Sales Manager
Contact Richard:

Toll Free: 800-631-2165 ext:318
732-935-1320 ext:318
Mobile: 732-809-0798

Eastern U.S.

John Gruskos

Western U.S. Flow Sales / Applications
John Gruskos - International Sales Manager
Contact John:

Toll Free: 800-631-2165 ext:330
732-935-1320 ext:330 ×
Western U.S.

Keith Sabat

Sales Engineer: HMI Software and PLC Displays
Keith SabatSales EngineerHMI Software and PLC Displays
Contact Keith:

Toll Free: 800-631-2165 ext:301
732-935-1320 ext:301
Mobile: 732-904-7887 ×

Stan Kurc

KEP-CM Sales Manager
Dave Osborne - KEP-CM Sales Manager
Contact Stan:

Toll Free: 800-631-2165 ext:325
732-935-1320 ext:325 ×

Ron Dawson

Infinlink HMI
Sales Manager /Technical Support
Ron Dawson - Infilink HMI Sales Manager
Contact Ron:

Toll Free: 800-631-2165 ext:332
Work Phone: 732-935-1320 ext:332
Mobile: 908-403-6854
Skype: rgdawson ×

John Gruskos

International Sales Manager
John Gruskos - International Sales Manager
Contact John:

Toll Free: 800-631-2165 ext:330
732-935-1320 ext:330 ×
Find The KEP
International Distributor
for Your Area Below

Search Tips

When searching for a product part number, try entering the first 3 to 5 characters of the model number if the complete model number yields little or no results. Do not include dashes or spaces. ×

Credit Application

We will consider extending terms to customers with excellent credit who purchase regularly with regular purchasing patterns and annual purchases of $5000 or more. Other customers are requested to make payment by credit card.

If you meet the requirements above, download the Credit Application Form and return it to KEP via fax or email. ×

Order Code & Price

ST2 Pricing ×

Large View

ST2 Large Photo ×